Lanzhou LS Rotary table ZP205
| Model | ZP205 |
| Dia. of opening mm (in) | 520.7(20 1/2) |
| mm(in) Table axis to center inner row sprocket teeth | 1353(531/4) |
| kN Max. static load | 3150 |
| Nm Max. working torque | 22555 |
| Max. Speed r/min | 350 |
| Gearratio | 3. 22 |
| mm Overall dimension (L^W^H) | 2292x1475x668 |
| Weight kg | 5530 |
Lanzhou LS Rotary table ZP205 parts list：
| ROTARY TABLE | 105. 07. 00 |
| Lock pawl—left | 105. 06. 01 |
| Lock pawl—right | 105. 06. 02 |
| Pin,handle lock pawl | 105. 06. 03-1 |
| Grease fitting | GB1152-89 (M10X1) |
| Grease fitting | |
| Pin,lock pawl | 105. 07. 01-1 |
| Plug | 105.06.05 (1/8") |
| Screw, hex soc hd | 105. 06. 10. 00 |
| Grease fitting | GB70-85 (M24X75) |
| Plate, I.D | 105. 07. 19 |
| Screw | GB67-85 (M4X8) |
| Dipstick, oil | 105.07.40.00 |
| Plug | 105.06.07(1 1/2") |
| Housing | 105.07.10.00 |
| Tongue | 105.06.08 |
| Cover | 105.07.20.00 |
| Ring gear (spiral teeth) | 105.07.21 |
| Ring gear (bevel ing teeth) | 105.07.20 |
| Bearing | 1687/650 |
| Table | 105.07.06 |
| Table installation | |
| Ring gear (sprial teeth) | |
| Table | |
| Bearing | |
| Columnar pin | |
| Support, bearing | |
| O-Ring | |
| Screw | |
| Washer, spring | |
| Shim | |
| Shim | |
| Shim | |
| Lock pawl | 105.05.18 |
| Pin | 105.05.19 |
| Pin,cotter 5X36 | GB91-86 |
| Pin,cotter 5X36 | |
| Kelly bushing | 105.06.31(5") |
| Kelly bushing | |
| Kelly bushing instal1 at ion | |
| Kelly bushing | |
| Board | |
| Pin | |
| Master bushing | 105.07.22 |
| Bearing | 1687/620 |
| Shim | 105.07.08 |
| Shim | |
| Shim | |
| Pinion shaft assembly | 105.07.30.00 |
| Drain plug 1" | 104.05.19 |
| Seal | 105.07.09 |
| O ring | 105.07.10 |
| Screw | 105.07.17(m20*70) |
| Washer,spring 20 | GB93-87 |
| Shim | 105.07.11 |
| Shim | 105.07.12 |
| Support, bearing | 105.07.13 |
| Screw | GB5783-86(M16X45) |
| Washer, spring 16 | GB93-87 |
| SIinger | 105.07.14 |
| O-Ring | 105.07.15 |
| Chain wheel | 105.07.16 |
| |
| Sprocket retainer | 105.06.24 |
| Flange | 105.06.25 |
| Main kelly bushing installation | |
| Main kelly bushing | |
| Spacer | |
| Board | |
| Sorew | |
| Nut | |
| Washer,spring 28X35X2 | |
| Valve DN32 (1 1/4") | |
| Joint R11/4 | |
| Kellybushing 20" | |
| |
| |
| Lift hook | 105K.05.26 |
| Lift hook | |
| |
| Pinion shaft assembly | 105.07.30.00 |
| 106.07.30.10 |
| 105.07.30.11 |
| 105.06.51.00 |
| End-plate of bearing | |
| Bearing | 32630 |
| O-Ring | D4-5-73 (420X8.6) |
| Spacer | 105.07.30.03 |
| Drain plug 1" | 104.05.19 |
| Drain plug 1" | |
| Magnet | |
| Pin,cotter 2X12 | |
| Shaft, pinion | 105.07.30.04 |
| Bearing | 3630 |
| Screw | GB5783-86 (K0X70) |
| Screw | |
| Screw | |
| Washer,spring 20 | GB93-87 |
| Washer,spring 20 | |
| Washer,spring 16 | |
| Shim | 105.06.50.04 |
| Capsule | 106,07.30.05 |
| Shim | 105.07.30.06 |
| Seal，oi | D7-1-67(180*220*15) |
| Retainer, pinion end | 105.06.50.07 |
| Retainer, pinion end | |
| |
| Nut, pinion shaft | 105.06.50.08 |
| Pinion shaft housing | |
| Key | 105.06.50.09-1 |
| Sprocket retainer | C6-1-72(150) |
| Screw with head holes | GB32.1-88 |
| Screw with head holes | |
| Screw with head holes | |
| Wire | |
| Shim | 105.07.30.07 |
| Shim | 105.07.30.08 |
| Screw with head holes | |