Lanzhou LS Rotary table ZP175
| Model | ZP175 |
| Dia. of opening mm (in) | 444.5 (17 1/2) |
| mm(in) Table axis to center inner row sprocket teeth | 1118(44) |
| kN Max. static load | 1350 |
| Nm Max. working torque | 13729 |
| Max. Speed r/min | 300 |
| Gearratio | 3.58 |
| mm Overall dimension (L^W^H) | 1935x1280x585 |
| Weight kg | 3888 |
Lanzhou LS Rotary table ZP175 Parts list:
| ROTARY TABLE | 105.11.00-1 |
| Lock pawl—left | 105.06.1 |
| Lock pawl—right | 105.06.2 |
| Pin,handle lock pawl | 105.06.03-1 |
| Grease fitting | GB1152-89 (M10X1) |
| Grease fitting | |
| Pin,lock pawl | 105.11.01 |
| Plug | 105.06.05 (1/8") |
| Screw, hex soc hd | 105.06.10.00 |
| Grease fitting | GB70-85 (M24X75) |
| Plate, I.D | 105.11.27 |
| Screw | GB67-85 (M4X8) |
| Dipstick, oil | 105.11.10.0 |
| Plug | 105.06.07 (1 1/2') |
| Housing | 105.11.20.00 |
| Tongue | 105.11.03 |
| Cover | 105.11.30.00 |
| Ring gear (spiral teeth) | 105.11.31 |
| Ring gear (bevel ing teeth) | 105.11.28 |
| Bearing | 91682/530 |
| Table | 105.11.05-1 |
| Table installation | |
| Ring gear (sprial teeth) | |
| Table | |
| Bearing | |
| Columnar pin | |
| Support, bearing | |
| O-Ring | |
| Screw | |
| Washer, spring | |
| Shim | |
| Shim | |
| Shim | |
| Lock pawl | 105.11.50.00 |
| Pin | 105.11.24 |
| Pin,cotter 5X36 | GB91-86 |
| Pin,cotter 5X36 | |
| Kelly bushing | 105.11.30(3 1/2") |
| Kelly bushing | 105.11.32(5") |
| Kelly bushing instal1 at ion | |
| Kelly bushing | |
| Board | |
| Pin | |
| Master bushing | 105.11.29 |
| Bearing | 1689/520 |
| Shim | |
| Shim | |
| Shim | 105.11.10 |
| Pinion shaft assembly | 105.11.40.00 |
| Drain plug 1" | |
| Seal | 105.11.18 |
| O ring | 105.11.14 |
| Screw | 105.11.17(M20*65) |
| Washer,spring 20 | GB93-87 |
| Shim | 105.11.15 |
| Shim | 105.11.16 |
| Support, bearing | 105.11.12 |
| Screw | GB5783-86(M16X40) |
| Washer, spring 16 | GB93-87 |
| SIinger | 105.11.13 |
| O-Ring | 105.11.11 |
| Chain wheel | 105.11.21-1 |
| |
| Sprocket retainer | |
| Flange | 105.11.19 |
| Main kelly bushing installation | |
| Main kelly bushing | |
| Spacer | |
| Board | |
| Sorew | |
| Nut | |
| Washer,spring 28X35X2 | |
| Valve DN32 (1 1/4") | |
| Joint R11/4 | |
| Kellybushing 20" | |
| |
| |
| Lift hook | 105K.11.21 |
| Lift hook | |
| |
| Pinion shaft assembly | 105.11.40.00 |
| 105.11.40.12 |
| 105.11.40.13 |
| |
| End-plate of bearing | 105.11.40.02 |
| Bearing | 32622EH |
| O-Ring | 105.11.40.03 |
| Spacer | 105.11.40.04 |
| Drain plug 1" | |
| Drain plug 1" | 105.08.60.01 |
| Magnet | 105.08.60.02 |
| Pin,cotter 2X12 | GB91-86 |
| Shaft, pinion | 105.11.40.05 |
| Bearing | 53622H |
| Screw | |
| Screw | GB5783-86(M20X60) |
| Screw | GB5783-86(M16X50) |
| Washer,spring 20 | |
| Washer,spring 20 | GB93-87 |
| Washer,spring 16 | GB93-87 |
| Shim | 105.11.40.06 |
| Capsule | 105.11.41.00 |
| Shim | 105.11.40.07 |
| Seal，oi | D7-1-67(140*170*15) |
| Retainer, pinion end | |
| Retainer, pinion end | 105.11.40.10 |
| |
| Nut, pinion shaft | |
| Pinion shaft housing | 105.11.40.08 |
| Key | 105.11.40.09 |
| Sprocket retainer | C6-3-92(125) |
| Screw with head holes | |
| Screw with head holes | GB32.1-88 |
| Screw with head holes | |
| Wire | |
| Shim | |
| Shim | |
| Screw with head holes | |